Archive

Posts Tagged ‘virtualisation’

Oracle releases VirtualBox 3.2

May 20th, 2010 1 comment

With the Sun now set, Oracle has released VirtualBox 3.2 finally 🙂 In particular some lovely optimisations for the newer Intel Core i5/i7 processors, Large  Page support (which helps significantly on Windows x64 and Linux) as well as a very welcome optimisation on the networking in VirtualBox as well as multi-monitor support for Windows Guests. Whats more RDP sessions are now accelerated (VRDP).

Amongst the changes from the changelog:

This version is a major update. The following major new features were added:

  • Following the acquisition of Sun Microsystems by Oracle Corporation, the product is now called Oracle VM VirtualBox and all references were changed without impacting compatibility
  • Experimental support for Mac OS X guests (see the manual for more information)
  • Memory ballooning to dynamically in- or decrease the amount of RAM used by a VM (64-bit hosts only) (see the manual for more information)
  • Page Fusion automatically de-duplicates RAM when running similar VMs thereby increasing capacity. Currently supported for Windows guests on 64-bit hosts (see the manual for more information)
  • CPU hot-plugging for Linux (hot-add and hot-remove) and certain Windows guests (hot-add only) (see the manual for more information)
  • New Hypervisor features: with both VT-x/AMD-V on 64-bit hosts, using large pages can improve performance (see the manual for more information); also, on VT-x, unrestricted guest execution is now supported (if nested paging is enabled with VT-x, real mode and protected mode without paging code runs faster, which mainly speeds up guest OS booting)
  • Support for deleting snapshots while the VM is running
  • Support for multi-monitor guest setups in the GUI for Windows guests (see the manual for more information)
  • USB tablet/keyboard emulation for improved user experience if no Guest Additions are available (see the manual for more information).
  • LsiLogic SAS controller emulation (see the manual for more information)
  • RDP video acceleration (see the manual for more information)
  • NAT engine configuration via API and VBoxManage
  • Use of host I/O cache is now configurable (see the manual for more information)
  • Guest Additions: added support for executing guest applications from the host system (replaces the automatic system presimparation feature; see the manual for more information)

Download from VirtualBox or get the Windows build. I’m really hoping the good Oracle keeps VirtualBox open, this is one kickass bit of kit.

{lang: 'en-GB'}
Share

VirtualBox 3.2.0 Beta 1 Released!

May 3rd, 2010 No comments

Finally downloaded the latest 3.2.0 release of VirtualBox today and gave it ago!

From the forum post for this pre-release.

VirtualBox Version 3.2.0 is a major update. The following major new features were added:

  • Following the acquisition of Sun Microsystems by Oracle Corporation, the product is now called Oracle VM VirtualBox and all references were changed without impacting compatibility.
  • Experimental support for Mac OS X guests
  • Memory ballooning to dynamically in- or decrease the amount of RAM used by a VM (64-bit hosts only) (see the manual for more information)
  • CPU hot-plugging for Linux (hot-add and hot-remove) and certain Windows guests (hot-add only) (see the manual for more information)
  • New Hypervisor features: with both VT-x/AMD-V on 64-bit hosts, using large pages can improve performance (see the manual for more information); also, on VT-x, unrestricted guest execution is now supported (if nested paging is enabled with VT-x, real mode and protected mode without paging code runs faster, which mainly speeds up guest OS booting)
  • Support for deleting snapshots while the VM is running
  • Support for multi-monitor guest setups in the GUI (see the manual for more information)
  • USB tablet/keyboard emulation for improved user experience if no Guest Additions are available
  • LsiLogic SAS controller emulation
  • RDP video acceleration
  • NAT engine configuration via API and VBoxManage
  • Guest Additions: added support for executing guest applications from the host system
  • OVF: enhanced OVF support with custom namespace to preserve settings that are not part of the base OVF standard

In addition, the following items were fixed and/or added:

  • VMM: fixed crash with the OpenSUSE 11.3 milestone kernel during early boot (software virtualization only)
  • VMM: fixed OS/2 guest crash with nested paging enabled
  • VMM: fixed Windows 2000 guest crash when configured with a large amount of RAM (bug 5800)
  • VMM: fixed massive display performance loss (AMD-V with nested paging only)
  • Linux/Solaris guests: PAM module for automatic logons added
  • GUI: guess the OS type from the OS name when creating a new VM
  • GUI: added VM setting for passing the time in UTC instead of passing the local host time to the guest (bug 1310)
  • GUI: fixed seamless mode on secondary monitors (bugs 1322 and 1669)
  • GUI: added –seamless and –fullscreen command line switches (bug 4220)
  • Settings: be more robust when saving the XML settings files
  • Mac OS X: rewrite of the CoreAudio driver and added support for audio input (bug 5869)
  • Mac OS X: external VRDP authentication module support (bug 3106)
  • Mac OS X: Moved the realtime dock preview settings to the VM settings (no global option anymore). Use the dock menu to configure it.
  • Mac OS X: added the VM menu to the dock menu
  • 3D support: fixed corrupted surface rendering (bug 5695)
  • 3D support: fixed VM crashes when using ARB_IMAGING (bug 6014)
  • 3D support: fixed assertion when guest applications uses several windows with single OpenGL context (bug 4598)
  • 3D support: added GL_ARB_pixel_buffer_object support
  • 3D support: added OpenGL 2.1 support
  • 3D support: fixed Final frame of Compiz animation not updated to the screen (Mac OS X only) (bug 4653)
  • Added support for virtual high precision event timer (HPET)
  • LsiLogic: Fixed detection of hard disks attached to port 0 when using the drivers from LSI
  • NAT: fixed ICMP latency (non-Windows hosts only; bug 6427)
  • Keyboard/Mouse emulation: fixed handling of simultaneous mouse/keyboard events under certain circumstances (bug 5375)
  • Shared folders: fixed issue with copying read-only files (Linux guests only; bug 4890)
  • OVF: fixed mapping between two IDE channels in OVF and the one IDE controller in VirtualBox

Bootilicious! Download links are on the site (updated for BETA2).

{lang: 'en-GB'}
Share

VirtualBox 3.1 released!

December 1st, 2009 No comments

Just when you thought you can start a new month without some new software, Sun has blessed the world with a ray of VirtualBox 3.1 goodness on us all! All hail the Sun. I’ve been using the Betas and trying out the spanking awesome Teleportation feature in VirtualBox 3.1. So lets take a bit of a look at the new grub.

Beam me up Scotty!

You know, people say the catch phrase thinking its from Star Trek, but did you know that it was never actually mentioned in any episode?

Teleportation or ‘Live Migration‘ in Xen/KVM  or vMotion in VMWare allows you to move a running virtual machine to another host without any downtime. Sun brings us this ‘Enterprise’ feature to VirtualBox. Whats even cooler, is that you can teleport your running VM on different host platforms (Windows -> OpenSolaris or Linux, vice versa) but not from one hardware set (Intel) to another (AMD) unless they both have the same instruction-sets. The transport layer for the teleportation is TCP/IP, so as long as the agreed port is open and accessible you can even teleport it through the tubes! (assuming you have a fast link like those pesky Dutch)

There are a few conditions and caveats as I’ve found. Firstly you must ensure (as you’d expect) the target VM has to have the exact same configuration as the source VM (same RAM, graphics memory, storage, CD/DVD images etc) the other thing is to be weary of the CPUs the host computer has. As long as its between the same generations (different clock speeds are OK) it should work (I tried between a QX6850 -> E6600 but QX6850->AMD X2 4600+ wasn’t so pretty!).

Once you’ve configured the target host to match the source host, time to ask VirtualBox to keep its eyes open for an incoming beam.

VBoxManage modifyvm [VirtualMachineName] --teleporter on --teleporterport [Port]

Then on the source host, send out the beams to initiate the teleportation:

VBoxManage controlvm [VirtualMachineName] teleport --host [TargetIP] --port [Port]

Give it some time to think and if you tried a localhost migration, it should migrate seamlessly 🙂

Scotty doesn’t know

Scotty doesn’t know about the other little changes, but you will. The new VirtualBox has lots of refinements in the UI. For one, new icons for all the Guest operating systems. The settings window has had a make over and includes ‘optimal settings’ detection.

Windows 2003 VM in VirtualBox 3.1

Windows 2003 VM in VirtualBox 3.1

Here its telling me my Windows 2003 VM should have atleast 20Mb Video Memory assigned to it to work well in full-screen mode. Heading over to the Display options in VirtualBox 3.1 we find that the Video Memory selectors have got little indicators now, as well as the inclusion of 2D Video Acceleration.

Windows 2003 VM - VirtualBox 3.1 Display Settings

Windows 2003 VM - VirtualBox 3.1 Display Settings

Depending how ever many cores you have, it will highlight what you should set as the maximum number of cores available for your VirtualMachine as well as the recommended RAM allocation. This is what I see in my Intel QX6850 development workstation.

VirtualBox 3.1 System Processor Settings

VirtualBox 3.1 System Processor Settings

VirtualBox 3.1 - Motherboard Settings

VirtualBox 3.1 - Motherboard Settings

VirtualBox now also has experimental support for Extensible Firmware Interface (EFI) which will eventually replace the aging BIOS bootstrap (which is the default). Well known operating systems that boot via EFI include Windows Vista and Windows 7, Apple OS X and Fedora 11+.

The Storage controls in VirtualBox GUI has also had a bit of a make over. The options to select a disk and a controller have changed, CD/DVD drives can be attached to an arbitrary IDE controller too now!

VirtualBox 3.1 - Storage

VirtualBox 3.1 - Storage

The networking settings GUI in the new VirtualBox has change too, not only that but you can now configure the network interfaces whilst the guest is running – YAY!

VirtualBox 3.1 Network Settings

VirtualBox 3.1 Network Settings

Snapshots are a lot more flexible in this release (much like VMWare’s snapshot feature). Previously you can only restore from the last created snapshot, now any arbitrary snapshot can be restored too or branched off.

For those who use OpenSolaris (like yours truely!) the rewritten USB support (still experimental btw!) should mean we can interact with our USB devices in Solaris Nevada 124 or higher now – I’m running 127 and have USB devices appearing in my VMs.

If those don’t give you any indication on to the pure awesomeness of this release, there was a significant performance improvement for APE & AMD64 guests (VT-x/AMD-V) which will be quite noticeable from what I’ve been told by a college.

As Barack Obama said, tis time for a change..log.

He didn’t say that, I just reused 36 Mafia’s Lolli Lolli. The entire change log appears below from the website.

VirtualBox 3.1.0 (released 2009-11-30)

This version is a major update. The following major new features were added:

  • Teleportation (aka live migration); migrate a live VM session from one host to another (see the manual for more information)
  • VM states can now be restored from arbitrary snapshots instead of only the last one, and new snapshots can be taken from other snapshots as well (“branched snapshots”; see the manual for more information)
  • 2D video acceleration for Windows guests; use the host video hardware for overlay stretching and color conversion (see the manual for more information)
  • More flexible storage attachments: CD/DVD drives can be attached to an arbitrary IDE controller, and there can be more than one such drive (the manual for more information)
  • The network attachment type can be changed while a VM is running
  • Complete rewrite of experimental USB support for OpenSolaris hosts making use of the latest USB enhancements in Solaris Nevada 124 and higher
  • Significant performance improvements for PAE and AMD64 guests (VT-x and AMD-V only; normal (non-nested) paging)
  • Experimental support for EFI (Extensible Firmware Interface; see the manual for more information)
  • Support for paravirtualized network adapters (virtio-net; see the manual for more information)

In addition, the following items were fixed and/or added:

  • VMM: guest SMP fixes for certain rare cases
  • GUI: snapshots include a screenshot
  • GUI: locked storage media can be unmounted by force
  • GUI: the a log window grabbed all key events from other GUI windows (bug #5291)
  • GUI: allow to disable USB filters (bug #5426)
  • GUI: improved memory slider in the VM settings
  • GUI: the VirtualBox website couldn’t be opened from the help menu (bug #4559)
  • 3D support: major performance improvement in VBO processing
  • 3D support: added GL_EXT_framebuffer_object, GL_EXT_compiled_vertex_array support
  • 3D support: fixed crashes in FarCry, SecondLife, Call of Duty, Unreal Tournament, Eve Online (bugs #2801, #2791)
  • 3D support: fixed graphics corruption in World of Warcraft (#2816)
  • 3D support: fixed Final frame of Compiz animation not updated to the screen (#4653)
  • 3D support: fixed incorrect rendering of non ARGB textures under compiz
  • iSCSI: support iSCSI targets with more than 2TiB capacity
  • VRDP: fixed occasional VRDP server crash (bug #5424)
  • Network: fixed the E1000 emulation for QNX (and probably other) guests (bug #3206)
  • NAT: added host resolver DNS proxy (see the manual for more information)
  • VMDK: fixed incorrectly rejected big images split into 2G pieces (bug #5523, #2787)
  • VMDK: fixed compatibility issue with fixed or raw disk VMDK files (bug #2723)
  • VHD: fixed incompatibility with Hyper-V
  • Support for Parallels version 2 disk image (HDD) files; see the manual for more information
  • OVF: create manifest files on export and verify the content of an optional manifest file on import
  • OVF: fixed memory setting during import (bug #4188)
  • Mouse device: now five buttons are passed to the guest (bug #3773)
  • VBoxHeadless: fixed loss of saved state when VM fails to start
  • VBoxSDL: fixed crash during shutdown (Windows hosts only)
  • X11 based hosts: allow the user to specify their own scan code layout (bug #2302)
  • Mac OS X hosts: don’t auto show the menu and dock in fullscreen (bug #4866)
  • Mac OS X hosts (64 bit): don’t interpret mouse wheel events as left click (bug #5049)
  • Mac OS X hosts: fixed a VM abort during shutdown under certain conditions
  • Solaris hosts: combined the kernel interface package into the VirtualBox main package
  • Solaris hosts: support for OpenSolaris Boomer architecture (with OSS audio backend).
  • Shared folders: VBOXSVR is visible in Network folder (Windows guests, bug #4842)
  • Shared folders: performance improvements (Windows guests, bug #1728)
  • Windows, Linux and Solaris Additions: added balloon tip notifier if VirtualBox host version was updated and Additions are out of date
  • Solaris guests: fixed keyboard emulation (bug #1589)
  • Solaris Additions: fixed as_pagelock() failed errors affecting guest properties (bug #5337)
  • Windows Additions: added automatic logon support for Windows Vista and Windows 7
  • Windows Additions: improved file version lookup for guest OS information
  • Windows Additions: fixed runtime OS detection on Windows 7 for session information
  • Windows Additions: fixed crash in seamless mode (contributed by Huihong Luo)
  • Linux Additions: added support for uninstalling the Linux Guest Additions (bug #4039)
  • Linux guest shared folders: allow mounting a shared folder if a file of the same name as the folder exists in the current directory (bug #928)
  • SDK: added object-oriented web service bindings for PHP5

Overall this is a solid new release from Sun – unsure about its stability as I’ve only been running a few VMs (Windows 2003, CentOS and Fedora 12) for about 10-12hrs. Nothing bad as yet.

Download from the VirtualBox site:

  • VirtualBox 3.1.0 for Windows hosts x86/amd64
  • VirtualBox 3.1.0 for Solaris and OpenSolaris hosts x86/amd64

Enjoy!

{lang: 'en-GB'}
Share

Redhat 5.4 released, CentOS 5.4 is coming soon!

September 3rd, 2009 No comments

If you haven’t heard already, Redhat has released the eagerly anticipated 5.4 release of Redhat Enterprise Linux at their Redhat Summit in Chicago. As expected, Redhat looks to have moved from using Xen as their favoured virtualisation hypervisor to using KVM (which is an integral part of the Linux Kernel). All this will eventually go into RHEV.

All the changes in this release are documented in the  Release Notes, unfortunately Ext4 is still not considered usable in this release (they’re targetting for RHEL6 possibly).

So what of the RHEL clone CentOS? Possibly a 2-4 week delay it seems. WOO! In the meantime, upgrading from 5.3 is easy peasy.

{lang: 'en-GB'}
Share

VirtualBox 3.0.2 released with SMP and Network IO fixes

July 13th, 2009 No comments

Quick note about VirtualBox 3.0.2 being released, this fixes up two critcal problems – one is the poor SMP performance everyone is coming to realise, and the network IO issue (reproduced in Fedora for

  • VMM: fixed network regressions (guest hangs during network IO) (bug #4343)
  • VMM: guest SMP performance improvements
  • VMM: fixed hangs and poor performance with Kaspersky Internet Security (VT-x/AMD-V only; bug #1778)
  • VMM: fixed crashes when executing certain Linux guests (software virtualization only; bugs #2696 & #3868)
  • ACPI: fixed Windows 2000 kernel hangs with IO-APIC enabled (bug #4348)
  • APIC: fixed high idle load for certain Linux guests (3.0 regression)
  • BIOS: properly handle Ctrl-Alt-Del in real mode
  • iSCSI: fixed configuration parsing (bug #4236)
  • OVF: fix potential confusion when exporting networks
  • OVF: compatibility fix (bug #4452)
  • NAT: fixed crashes under certain circumstances (bug #4330)
  • 3D support: fixed dynamic linking on Solaris/OpenSolaris guests (bug #4399)
  • 3D support: fixed incorrect context/window tracking for multithreaded apps
  • Shared Folders: fixed loading from saved state (bug #1595)
  • Shared Folders: host file permissions set to 0400 with Windows guest (bug #4381)
  • X11 host and guest clipboard: fixed a number of issues, including bug #4380 and #4344
  • X11 Additions: fixed some issues with seamless windows in X11 guests (bug #3727)
  • Windows Additions: added VBoxServiceNT for NT4 guests (for time synchronization and guest properties)
  • Windows Additions: fixed version lookup
  • Linux hosts: workaround for buggy graphics drivers showing a black VM window on recent distributions (bug #4335)
  • Linux hosts: fixed typo in kernel module startup script (bug #4388)
  • Installer: support Pardus Linux
  • Solaris hosts: several installer fixes
  • Solaris host: fixed a preemption issue causing VMs to never start on Solaris 10 (bug #4328).
  • Solaris guest: fixed mouse integration for OpenSolaris 2009.06 (bug #4365)
  • Windows hosts: fixed high CPU usage after resuming the host (bug #2978)
  • OVF: accept ovf:/disk/ specifiers with a single slash in addition to ovf://disk/ (bug #4452)
  • Fixed a settings file conversion bug which sometimes caused hardware acceleration to be enabled for virtual machines that had no explicit configuration in the XML.

Download links:

  • VirtualBox 3.0.2 for Windows hosts x86/amd64
  • VirtualBox 3.0.2 for Solaris and OpenSolaris hosts x86/amd64
  • VirtualBox 3.0.2 Software Developer Kit (SDK) All platforms (registration required)

I’ve been running it all day at work today without issues.

{lang: 'en-GB'}
Share

Time flies: VirtualBox 3.0 final is out!

July 1st, 2009 No comments

It only feels like last week that I mentioned the beta release of VirtualBox 3.0, Sun has released the final version of the much anticipated v3.0!

As mentioned earlier, this release is super exciting for the simple fact that it has SMP support – a maximum of 32 virtual CPUs (but relax, you shouldn’t assign more than what you can afford – or the number of cores you have!). VMWare still only supports a maximum of 2 virtual-cpus (this _may_ change in VMWare 7.0!), another feat is the hardware 3D (Direct3D/OpenGL)  support for guests.

This version is a major update. The following major new features were added:

  • Guest SMP with up to 32 virtual CPUs (VT-x and AMD-V only; see chapter 3.7.2.2 of the user manual)
  • Windows guests: ability to use Direct3D 8/9 applications / games (experimental; see chapter 4.8 of the user manual)
  • Support for OpenGL 2.0 for Windows, Linux and Solaris guests

In addition, the following items were ?xed and/or added:

  • Solaris hosts: allow suspend/resume on the host when a VM is running (bug #3826)
  • Solaris hosts: loosen the restriction for contiguous physical memory under certain conditions
  • Mac OS X hosts: ?xed guest PAE
  • Linux hosts: kernel module compile ?xes for 2.6.31 (bug #4264)
  • VMM: ?xed occasional guru meditation when loading a saved state (VT-x only)
  • VMM: eliminated IO-APIC overhead with 32 bits guests (VT-x only, some Intel CPUs don’t support this feature (most do); bug #638)
  • VMM: ?xed 64 bits CentOS guest hangs during early boot (AMD-V only; bug #3927)
  • VMM: performance improvements for certain PAE guests (e.g. Linux 2.6.29+ kernels)
  • VMM: some Windows guests detected a completely wrong CPU frequency (bug #2227)
  • VMM: ?xed hanging and unkillable VM processes (bug #4040)
  • VMM: ?xed random infrequent guest crashes due to XMM state corruption (Win64 hosts only)
  • VMM: performance improvements for network I/O (VT-x/AMD-V only)
  • GUI: added mini toolbar for fullscreen and seamless mode (Thanks to Huihong Luo)
  • GUI: redesigned settings dialogs
  • GUI: allow to create/remove more than one host-only network adapters (non Windows hosts)
  • GUI: display estimated time for long running operations (e.g. OVF import/export)
  • GUI: ?xed rare hangs when open the OVF import/export wizards (bug #4157)
  • 3D support: ?xed VM crashes for client applications using incorrect OpenGL states
  • 3D support: ?xed memory corruption when querying for supported texture compression formats
  • 3D support: ?xed incorrect rendering of glDrawRangeElements
  • 3D support: ?xed memory leak when using VBOs
  • 3D support: ?xed glew library detection
  • 3D support: ?xed random textures corruption
  • VRDP: support Windows 7 RDP client
  • Networking: ?xed another problem with TX checksum of?oading with Linux kernels up to version 2.6.18
  • NAT: ?xed “open ports on virtual router 10.0.2.2 – 513, 514” (forum)
  • NAT: allow to con?gure socket and internal parameters
  • NAT: allow to bind sockets to speci?c interface
  • PXE boot: signi?cant performance increase (VT-x/AMD-V only)
  • VHD: properly write empty sectors when cloning of VHD images (bug #4080)
  • VHD: ?xed crash when discarding snapshots of a VHD image
  • VHD: ?xed access beyond the block bitmap which could lead to arbitrary crashes
  • VBoxManage: ?xed incorrect partition table processing when creating VMDK ?les giving raw partition access (bug #3510)
  • VBoxManage: support cloning to existing image ?le
  • OVF: several OVF 1.0 compatibility ?xes
  • OVF: ?xed exporting of disk images when multiple virtual machines are exported at once
  • Virtual mouse device: eliminated micro-movements of the virtual mouse which were confusing some applications (bug #3782)
  • Shared Folders: sometimes a ?le was created using the wrong permissions (2.2.0 regression; bug #3785)
  • Shared Folders: allow to change ?le attributes from Linux guests and use the correct ?le mode when creating ?les
  • Shared Folders: some content was incorrectly written under certain conditions (bug #1187)
  • Shared Folders: ?xed incorrect ?le timestamps, when using Windows guest on a Linux host (bug #3404)
  • X11 clipboard: ?x duplicate end of lines (bug #4270)
  • X11 guests: a number of shared clipboard ?xes
  • Linux guests: Guest Additions support for SUSE Linux Enterprise Desktop 11
  • Linux guests: new daemon vboxadd-service to handle time synchronization and guest property lookup
  • Linux guests: implemented guest properties (OS info, logged in users, basic network information)
  • Windows host installer: VirtualBox Python API can now be installed automatically (requires Python and Win32 Extensions installed)
  • USB: Support for high-speed isochronous endpoints has been added. In addition, read-ahead buffering is performed for input endpoints (currently Linux hosts only). This should allow additional devices to work, notably webcams (bug #242).
  • USB: ?xed error handling for some USB dongles
  • Web service: ?xed inability to handle NULL pointers for object arguments, which are valid values for a lot of APIs, in both the raw and the object-oriented web service.
  • Web service: object-oriented bindings for JAX-WS did not exhibit interface inheritance correctly, ?xed
  • Web service: added support for IDisplay and IGuest interfaces, which were previously unavailable
  • Registration dialog uses Sun Online accounts now

Why keep reading, upgrade dammit!

  • VirtualBox 3.0.0 for Windows hosts x86/amd64
  • VirtualBox 3.0.0 for Solaris and OpenSolaris hosts x86/amd64
  • VirtualBox 3.0.0 Software Developer Kit (SDK) All platforms (registration required)

Enjoy, see the manual online too!

{lang: 'en-GB'}
Share

Sun-shine lolipops: VirtualBox 2.2.4 comes out of the oven

May 31st, 2009 No comments

Sun Microsystems (pwnd by the Oracle) has release VirtualBox 2.2.4.

VirtualBox 2.2.4 (released 2009-05-29)

This is a maintenance release. The following items were ?xed and/or added:

  • Windows Installer: ?xed a potential hang during installation
  • Windows Installer: ?xed several problems (bug #3892)
  • Solaris hosts: make it work with Solaris build 114 or later (bug #3981)
  • Solaris hosts: ?xed a bug serial port character handling found during loopback (bug #3120)
  • Linux hosts: adapted vboxdrv.sh to the latest changes in VBoxManage list runningvms (bug #4034)
  • Windows hosts: ?xed a crash caused by host-only/bridged networking
  • Mac OS X hosts: ?xed access to host DVD with passthrough disabled (bug #4077)
  • Guest Additions: ?xed problems with KDE 4 not recognizing mouse clicks
  • Windows Additions: ?xed incorrect 8-bit guest color depth in Windows 7 guests
  • GUI: warn if VT-x/AMD-V could not be enabled for guests that require this setting (bug #4055)
  • VMM: ?xed occassional crash due to insuf?ent memory
  • VMM: ?xed hanging 64 bits Solaris guests
  • VMM: restore from a saved state occassionally failed (bugs #3984 and #2742)
  • Clipboard: ?xed a deadlock while shutting down the shared clipboard on X11 hosts (bug #4020)
  • OVF: ?xed potential hang during import
  • OVF: ?xed potential crashes during import/export on Win64 hosts
  • VBoxManage modifyhd –compact: ?xed bug which could lead to crashes and image corruption (bug #3864)
  • VBoxManage metrics collect: now ?ushes the output stream.
  • VHD: made VBoxManage internalcommands sethduuid work for .vhd ?les (bug #3443)
  • VHD: some .vhd ?les could not be cloned (bug #4080)
  • VMDK: ?xed creating snapshots
  • NAT: improvement of TCP connection establisment (bug #2987)
  • NAT: ?xed order of DNS servers in DHCP lease (bug #4091)
  • NAT: ?xed DHCP lease for multiple name servers (bug #3692)
  • NAT: ?xed a potential segfault if the host lost its connectivity (bug #3964)
  • Shared Folders: deny access to parent directories on Windows hosts (bug #4090)
  • Shared Folders: make rm/rmdir work with Solaris guests on Windows hosts
  • Networking: ?xed the problem with blocked receiving thread when a broadcast packet arrives too early to be handled by uninitialized e1000 adapter.
  • Networking: ?xed the problem that caused host freezes/crashes when using bridged mode with host’s interface having RX checksum of?oading on (bug #3926 and related). Fixes problems with TX of?oading as well (bug #3870)
  • PXE boot: Added support for PRO/1000 MT Server adapter.
  • Python bindings: ?xed keyword con?ict
  • SCSI: ?xed occasional crashes on Win64
  • Serial: allow to redirect the serial port to a raw ?le (bug #1023)
  • VRDP: ?xed a rare incorrect screen update

This release’s most significant update is the bugfix for truncating your files to 300Kb when attempting to compact the hard-disk – damn annoying! Update mos def.

Download:

  • VirtualBox 2.2.4 for Windows hosts x86/amd64
  • VirtualBox 2.2.4 for Solaris and OpenSolaris hosts x86/amd64
  • VirtualBox 2.2.4 Software Developer Kit (SDK) All platforms (registration required)

Enjoy, oh btw did you know that OpenSolaris 2009.06 is coming tomorrow (Monday?)

{lang: 'en-GB'}
Share

Microsoft discusses Windows XP mode in Windows 7

April 30th, 2009 1 comment

REDMOND, Wash. — April 28, 2009 — As part of the upcoming Windows 7 Release Candidate milestone, Microsoft will release a beta version of Windows XP Mode, which allows users of Windows 7 Professional and above to launch many older Windows XP productivity applications directly from their Windows 7 desktop. The Windows XP Mode stand-alone feature is specifically designed to help small businesses that are using Windows XP applications move to Windows 7. For larger businesses, Microsoft Enterprise Desktop Virtualization (MED-V) MED-V 2.0 builds on top of Windows Virtual PC and provides centralized management of Windows XP Mode. MED-V 2.0 will be available in beta within 90 days of general availability of Windows 7.

PressPass spoke with Scott Woodgate, director of Desktop Virtualization and Microsoft Desktop Optimization Pack (MDOP) at Microsoft, to find out how this new advancement is helping ensure a smooth transition for customers planning to migrate to Windows 7.

Read the entire interview on Windows 7 Professional and Windows XP Mode. Personally, I think the ‘XP Mode’ on Windows 7 is a great thing, unfortunately some people dont (and for some of the authors points I strongly disagree with). Whilst its not included in the ‘out-of-the-box functionality’ (phrase around the office these days) you will be able to download the bits –  VirtualPC engine & a Windows XP SP3 Licensed copy if you have Windows 7 Professional, Windows 7 Enterprise, or Windows 7 Ultimate.

The crudge of this is that, the virtualised version wont include the same security model as Windows 7, so you’ll have to have two anti-virus’s installed, but it will function much like Parallels and VMWare Fusion does on Mac.

Dont take peoples word for it, try it with the Windows 7 RC.

{lang: 'en-GB'}
Share

Think outside the box: Getting VirtualBox 2.x running in Jaunty

April 25th, 2009 No comments

Here’s a quick guide on getting VirtualBox 2.x running in Ubuntu 9.04.

First make sure you add the VirtualBox repositorys to your sources:

$ sudo nano /etc/apt/sources.lst

Then add the following to the top of the file:

# VirtualBox Intrepid Repository
deb http://download.virtualbox.org/virtualbox/debian intrepid non-free

The Jaunty repository should be made available soon, in the meantime the intrepid release will work. Next we need to add the Sun public key:

$ wget -q http://download.virtualbox.org/virtualbox/debian/sun_vbox.asc -O- | sudo apt-key add –

This will download the key and add it to your keychain. Now we need to update our sources so Aptitude knows whats around.

$ sudo aptitude update

Next we need to download some build tools so we can build the kernel modules properly.

$ sudo aptitude install build-essential linux-headers-$(uname -r)

This will download the latest build tools and the headers for the kernel your running. Next lets grab the VirtualBox distribution.

You can elect to use the Open Source Edition (virtualbox-ose)  or the Free Edition (virtualbox-2.2). Differences between the two are specified on the VirtualBox site.

$ sudo aptitude install virtualbox-2.2

Then you may find that the VirtualBox Driver may fail to install. Here is where we manually do it.

$ sudo /etc/init.d/vboxdrv setup

This will stop any existing modules, remove the netfilter and virtualbox kernels, rebuild and start the modules for you.

From this point on you can use VirtualBox. Find it in Applications > System Tools > VirtualBox.

{lang: 'en-GB'}
Share

Hot Icecubes: Sun releases VirtualBox 2.2

April 9th, 2009 No comments

My favourite hypervisor, VirtualBox has just been upgraded to 2.2. Sun ushered in v2.2 recently and this release brings some uber-goodness. From the changelog;

This version is a major update. The following major new features were added:

  • OVF (Open Virtualization Format) appliance import and export (see chapter 3.8, Importing and exporting virtual machines, User Manual page 55)
  • Host-only networking mode (see chapter 6.7, Host-only networking, User Manual page 88)
  • Hypervisor optimizations with signi?cant performance gains for high context switching rates
  • Raised the memory limit for VMs on 64-bit hosts to 16GB
  • VT-x/AMD-V are enabled by default for newly created virtual machines
  • USB (OHCI & EHCI) is enabled by default for newly created virtual machines (Qt GUI only)
  • Experimental USB support for OpenSolaris hosts
  • Shared folders for Solaris and OpenSolaris guests
  • OpenGL 3D acceleration for Linux and Solaris guests (see chapter 4.8, Hardware 3D acceleration (OpenGL), User Manual page 70)
  • Added C API in addition to C++, Java, Python and Web Services

Enticing, whats more you can build a virtual machine, export it from a test environment (QA Labs) and then push it into production and fully supports the Open Virtualization Format (OVF) standard. Download your copy and give the new version ago, I’m definitely noticing a speed bump in our QA test VMs.

{lang: 'en-GB'}
Share